Tamko Metal Works
Tamko metal shingles are known for both strength and beauty. These shingles are manufactured to resemble the original material down to the finest detail, so you get all the benefits of a metal roof system with the beauty of slate, tile, or even wood. Tamko MetalWorks steel shingles are created using G 90 steel with a Fluropon coil coating system for increased strength, and use a four-way locking system for easier installation.
For more about Tamko MetalWorks shingles, call Alpine Roofing Construction, a Certified Applicator of Tamko Roofing Systems.

MetalWorks Metal Shingle Features
For more about Tamko MetalWorks shingles, call Alpine Roofing Construction, a Certified Applicator of Tamko Roofing Systems.
- G-90 steel construction.
- Kynar 500®/Hylar 5000® finish, Fluropon® Coil Coating System containing 70% polyvinylidene Fluoride
- (PVDF) proprietary resins.
- Can be used for reroofing applications—install over up to two layers of asphalt shingles. Check your local
- building code. Building code restrictions may apply.
- Can be applied on decks greater than 3 inches per foot.
- Available in a variety of colors.
- Four-way locking system
- 100% recyclable
- 50-year Limited Warranty and Arbitration Agreement, 25-year Full Start Period
MetalWorks Metal Shingle Available Colors
Stonecrest Slate Colors
- Sequoia Red
- Vermont Blue
- Timber Brown
- Forest Green
- Sierra Slate Grey
- River Rock Brown
- Quaker Green
- Canyon Copper Bronze
Stonecrest Tile Colors
- Vermont Blue
- Sierra Slate Grey
- Quaker Green
Astonwood Colors
- Sequoia Red
- Vermont Blue
- Timber Brown
- Forest Green
- Sierra Slate Grey
- River Rock Brown
- Quaker Green
- Canyon Copper Bronze
Tamko MetalWorks Product Details
- Shingle size 12-5/8″ × 39-3/4″
- Exposure 12″
- Coverage per Box†† 49.2 sq.ft.
- Shingles per Box 15
- Shingle Material 28 gauge nominal 0.0162” (0.066802 cm) thickness,
- including G-90 galvanization and paint coatings.
- Exterior Finish Fluropon coatings with primer, 1 mil dry film thickness.
- Interior Finish Wash coat with primer, 0.6 mil dry film thickness.
- Clip Size 1-1/4” wide × 2-1/8” long × 1/5” deep
- Clip Material 0.015” thick, G-90 galvanized steel