MBCI

MBCI Metal Roofing Manufacturer

MBCI is The Leading Metal Wall Panel and Metal Roofing Manufacturer. Founded in 1976 in Houston, TX. MBCI has Strategic Locations Positioned Throughout the U.S. – Delivering Products to Contractors and Suppliers Quickly and Efficiently while Supporting Clients Needs from Project Conception to Completion. Standing by their Best In Class Customer Care Solutions.

MBCI Manufactures More than 90 Different High-Quality Metal Wall Panels and Metal Roofing Profiles in addition to Structural, Trim, and Accessory Components Compatible with Any of your Architectural Project Needs.

Concealed Fastener Metal Roof Systems

Concealed Fastener Metal Roofing Systems are Sleek, Contemporary, and Aesthetically Desirable.

Benefits:

  • Preferred by Architects For Commercial and Residential Applications.
  • Weather, Pest, and Fire Resistant.
  • Extreme Durability, Reducing the Cost of Maintenance and Repairs.
  • Hidden Fasteners
  • Low Profile and Narrower Compared to Exposed Fastener Panels.
  • Smooth Snap-Together Installation
  • MBCI Metal Panels may be Installed over Traditional or Wood Systems. 

Craftsman Series

MBCI Craftsman Series – A Snap On Batten Metal Roofing System. The Batten & Pan are Created Separately, Maximizing Structural Flexibility and Easier Installation on Complex Valley, Hip, and Slope Adjustments. Making Difficult Design Transitions Uncomplicated and the Need for Flashings Unnecessary.

Benefits

  • Water Shedding Systems
  • 3 Slope Transitions from Roof – Fascia – Soffit can be Formed into One Uninterrupted Pan & Batten.
  • Concealed Clip Firmly Locks the Batten and Panel while Permitting Expansion & Contraction.
  • 29 Color Options

Craftsman Series High Batten

High Profile Snap On Batten Metal Roofing System

Benefits

  • Width Coverage – 12 In. to 16 ½ In.
  • 3:12 Slope Minimum
  • Metal Panel Attachment System – Concealed Fastening System
  • 24 Gauge is standard – 26 & 22 are Available
  • Smooth Finish is Standard and Embossed Finishes are Available
  • Metallic, Signature 200, Galvalume Plus and Signature 300 Coatings

Craftsman Series Small Batten

A Profile Appropriate for In Field Curving through a Certified Applicator.

Benefits

  • Water Shedding Metal Panel System
  • When Applied to Mansards & Roofs, a Waterproof Solid Substrate is Necessary.
  • Craftsman Series Construction Results in Less Difficult Structural Transitions without the Need for Flashings.
  • One Continuous Pan & Batten for Slope Differences from roofing Systems to Fascia Systems to Soffit Systems.
  • Concealed Clip Locked Batten to Panel while Compensating for Contraction & Expansion.

Specs

  • 12 In. to 16 1⁄2 In. Width Coverage
  • 3:12 Slope Minimum
  • Concealed Panel Attachment Fastening System.
  • Standard 24 Gauge and 26 & 22 are Available
  • Standard Smooth Finish and Embossed Available
  • Metallic, Signature 200, Galvalume Plus and Signature 300 Coatings.

Slimline Series

MBCI Slimline Roofing Panel Systems are Aesthetically Contemporary and Sleek in their Profile which makes them Desirable for Architectural Details and Residential Projects.

Specs

  • 16 In. Width Coverage
  • 3:12 Slope Minimum
  • Concealed Panel attachment Fastening System
  • Standard 29 Gauge and 26 is Available.
  • Signature 200 and Galvalume Coatings
  • Standard Minor Rib Finish W/ Striations and Striations Only are Available.
  • Non Standard Selections Require Oil Canning Waiver.
  • 20 Color Options

Standing Seam Roof Systems

These Metal Panel Roof Systems are Extremely Durable and Available in Two Fastening Styles – Snap Lock and Mechanically Seamed in the Field.
Snap Lock Standing Seam Panels are a Roof System that is Secured to the Roofing Deck with Clips Allowing for Roofing Panel Thermal Movement. Mechanically Seamed Panels are Similar to Snap Lock Systems. These Systems Require Clips to Secure them and must be Crimped Together by Hand or Machine. There are 4 Standard Standing Seam Metal Roofing Systems Manufactured – 1.) Symmetrical, 2.) Double Lock, 3.) One Piece Snap Lock Interlock 4.) Two Piece Snap Lock Interlock. Contact Alpine Roofing Construction’s MBCI Standing Seam Roof Systems Specialist for your Architectural Metal Roofing Needs.

Benefits:

  • Weather Resistant 
  • Extremely Durable 
  • Fire Resistant 
  • Impact resistant 
  • Special Clips Allowing Thermal Roof Expansion & Contraction due to Differentiating Temperatures 
  • Trapezoidal & Vertical Standing Seam Legs
  • 29 Color Options
A piece of BattenLok HS Single

BattenLok HS

BattenLok HS is a Standing Seam Metal Roofing System that can be Mechanically Seamed in the Field During Installation. These Roofing Systems are Extremely Functional, Exceptionally Strong and are Available in a Wide Variety Coating Options. BattenLok HS Metal Panels are Manufactured in a 2 In. Vertical Height Seam and 12 In. & 16 In. Widths. These Systems can be Installed Over Bar Joist and Purlins and transform from the Roof to Fascia. A Solid Substrate is Not Necessary to Support a BattenLok HS Standing Seam Metal Roof System.

  • 12 In. to 16 ½ In. Width Coverage
  • ½:12 Slope Minimum
  • Concealed Panel Attachment Fastening System – High, Low, Floating or Fixed, No Utility Insulation Clearance.
  • Standard 24 Gauge and 22 Available.
  • Embossed or Smooth W/ Striations and Pencil Rib Finishes.
  • Signature 300 Metallic, Signature 200, Galvalume Plus and Signature 300 Coatings.
  • 29 Color Options
A piece of a Curved BattenLok Single

Curved BattenLok Systems

The Curved BattenLok Metal Standing Seam Roofing System is a 2 In. High, Curved, Water Shedding System. These Curved Metal Roofing Systems are Seamed in the Field During Installation.

Benefits

  • Curved BattenLok can be Installed Over Metal and Wood Decks with Strong/Reinforced Insulation.
  • Can be Curved to a 20 Ft. Minimum, Installed Over Joist and Purlins.
  • Open Framing Installations do away with Expensive Curved Decks and Membranes.

Specs

  • 16 In. Width Coverage
  • Concealed Panel Attachment Fastening System – High, Low, Floating or Fixed, No Utility Insulation Clearance
  • Standard 24 Gauge
  • Standard Smooth Striated Finishes
  • Signature 300, Galvalume Plus, and Signature 200 Coatings
  • 29 Color Options
A piece of a DoubleLok Single

DoubleLok Roof Systems

The Double Lok Metal Roof Panel is Excellent for Architectural, Commercial and Industrial Installations. Double Lok Improves the Life Span and Energy Efficiency of an Existing or Renovated Structure. Upgrading an Existing Roof to a Double Lok Standing Seam Metal Roofing System over an R Panel Roof Does Not Require Sub Framing while Preserving the Integrity of the Structure. Two Techniques for Improving Energy Efficiency when Applying the Double Lok Standing Seam Panel over an Existing R Panel Roof: 1.) Applying 2” Unfaced-Fiberglass-Insulation Between the Double Lok System and the Existing R Panel System. 2.) Ventilating the Space Between the New and Existing Roofing Systems by Installing an Eave Vent Strip Providing Air Flow. High Clips are Required for Clearance Between the Double Lok System and the Existing R Panel Roof.

  • Double Lok Metal Panels are Manufactured in 18″ & 24″ Widths.
  • Minimum Slope : 1/4:12
  • Panel Attachment : Concealed Fastening System; Low, High and 2″ Stand Off Sliding Clips
  • Gauge : 22 and 24
  • Finishes : Smooth (standard); Embossed (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
A piece of LokSeam Flat Single

LokSeam Roof Systems

  • Coverage Width: 12″, 16″, 18″
  • Minimum Slope : 3:12
  • Panel Attachment : Concealed Fastening System, Standard and UL90 Clips
  • Gauge : 24 (standard);26 (12″) 22 (12″, 16″, 18″) (optional)
  • Finishes : Striated (standard); Embossed Striated (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
A piece of SuperLok metal roofing

SuperLok Systems

  • Coverage Width: 12″, 16″
  • Minimum Slope : 1/2:12
  • Panel Attachment : Concealed Fastening System; Low, High (fixed or floating), Utility (no insulation clearance)
  • Gauge : 24 (standard); 26, 22 (optional)
  • Finishes : Striated (standard); Embossed Striated (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
A piece of Ultra dek metal roofing

Ultra-Dek Roofing Systems

  • Coverage Width: 18″, 24″
  • Minimum Slope : 1/4:12
  • Panel Attachment : Concealed Fastening System; Low, High (fixed or sliding)
  • Gauge : 24 (standard); 22 (optional)
  • Finishes : Smooth (standard); Embossed (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic

Curved Roof & Fascia Systems

MBCI leads the industry in UL 90 ratings on curved metal panels and can help you create the style you’re looking for with multiple types of metal panel and fascia system styles.

Features:

  • Structural and non-structural panel options
  • Highly durable
  • Water shedding capabilities
  • Underwriters Laborites Wind Uplift (UL 90) rating
  • Fit a variety of applications

Curved BattenLok Roofing Systems

  • Coverage Width: 16″
  • Panel Attachment : Concealed Fastening System; Low, High (fixed or floating), Utility (no insulation clearance)
  • Gauge : 24 (standard)
  • Finishes : Smooth Striated (standard)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300

FlexLok Roof System

  • Coverage Width: 9 1/2″
  • Panel Attachment : Concealed Fastening System
  • Gauge : 24 (standard); 22 (optional)
  • Finishes : Smooth (standard); Embossed (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic

Exposed Faster Roof Panels

MBCI exposed faster roof panels are durable, offering protection from weather, pests, and fire. Because of the exposed fastening system used with these metal panels, maintenance is minimal. Call Alpine Roofing Construction to find out which of MBCI’s multiple exposed faster roofing panel types is right for your project.

Features:

  • Cost-effective
  • Easy installation
  • Variety of profiles
  • Ideal for light applications
  • Vertical and horizontal installation options

5V Crimp Metal Panels

  • Coverage Width: 24″
  • Minimum Slope : 3:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 29 (standard); 26 (optional)
  • Finishes : Smooth (standard)
  • Coatings : Galvalume Plus®, Signature® 200
  • Rib Spacing : 12″ on center
  • Rib Height : 1/2″

7.2 Panel

  • Coverage Width: 36″
  • Minimum Slope : 1/2:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 24 (standard); 26, 22 (optional)
  • Finishes : Smooth (standard); Embossed (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
  • Rib Spacing : 7.2″ on center
  • Rib Height : 1-1/2″
  • Length : 5′-0″ to 50′-0″

PBC Roof Panels

  • Coverage Width: 32″
  • Minimum Slope : 3:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 26 (standard); 24, 22 (optional)
  • Finishes : Smooth (standard); Embossed (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300
  • Rib Spacing : 2 2/3″ on center
  • Rib Height : 7/8″
  • Length : 5′-0″ to 50′-0″
A piece of PBD metal roofing

PBD Roof Panels

  • Coverage Width: 32″
  • Minimum Slope : 3:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 26 (standard); 24, 22 (optional)
  • Finishes : Smooth (standard); Embossed (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300
  • Rib Spacing : 2 2/3″ on center
  • Rib Height : 5/8″
  • Length : 5′-0″ to 50′-0″
A piece of PBR metal Roofing

PBR Roof Panels

  • Coverage Width: 36″
  • Minimum Slope : 1/2:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 26 (standard); 24, 22 (optional)
  • Finishes : Smooth (standard); Embossed (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300
  • Rib Spacing : 12″ on center
  • Rib Height : 1-1/4″
  • Length : 5′-0″ to 50′-0″
A piece of PBU metal roofing

PBU Roofing Panels

  • Coverage Width: 36″
  • Minimum Slope : 1:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 26 (standard); 24, 22 (optional)
  • Finishes : Smooth (standard); Embossed (optional)
  • Coatings : Galvalume Plus®, Signature® 200, Signature® 300
  • Rib Spacing : 6″ on center
  • Rib Height : 3/4″
  • Length : 5′-0″ to 50′-0″
A piece of PermaClad metal roofing

Perma-Clad Roof Panels

  • Coverage Width: 36″
  • Minimum Slope : 3:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 29 (standard); 26 (optional)
  • Finishes : Smooth (standard) Galvalume Plus®, Signature® 200
  • Rib Spacing : 9″ on center
  • Rib Height : 5/8″
A piece of Rainguard metal roofing

Rain Guard Metal Panels

  • Coverage Width: 36″
  • Minimum Slope : 3:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 29 (standard); 26 (optional)
  • Finishes : Smooth (standard)
  • Coatings : Galvalume Plus®, Signature® 200
  • Rib Spacing : 6″ on center
  • Rib Height : 15/32″
A piece of Rustic C metal roofing

Rustic C Panels

  • Coverage Width: 32″
  • Minimum Slope : 3:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 22 (standard)
  • Rib Spacing : 2.67″ on center
  • Rib Height : 7/8″
WeatherSafe metal roofing

WeatherSafe

  • Coverage Width: 36″
  • Minimum Slope : 3:12
  • Panel Attachment : Exposed Fastening System
  • Gauge : 29 (standard); 26 (optional)
  • Finishes : Smooth (standard)
  • Coatings : Galvalume Plus®, Signature® 200
  • Rib Spacing : 12″ on center
  • Rib Height : 7/8″

MBCI has more metal panel options than any other manufacturer in the industry. Let Alpine Roofing Construction help you find the best option for your roof system.

Contact Us Today

To top